Water Meters Manufacturers Water Meters Manufacturers Water Meters in India UAE Dubai South Africa Sri Lanka Afghanistan Industrial Valves Manufacturers Industrial Valves Manufacturers in India

Industrial Valves

We are a prominent organization engaged in manufacturing and supplying a commendable gamut of qualitative Cast Iron Valves. The offered range encompasses Cast Iron Butterfly Valve, Cast Iron Y Type Strainer, Cast Iron Ball Valve, , Cast Iron Dual Plate Check Valve and Cast Iron Non Return Valve. Apart from this, we provide Cast Iron Sluice Valve, Cast Iron Swing Check Valve, Cast Iron Accessible Feed Check Valve, Cast Iron Horizontal Lift Check Valve, Cast Iron Globe Steam Stop Valve, Cast Iron Right Angle Globe Valve and Cast Iron Globe Valve, in this range. Fabricated using supreme quality raw material, these offered valves comply with the defined parameters of the industry. Furthermore, keeping in mind the multifarious demands of the clients, we are presenting this gamut in different specifications.

Cast Iron Valves & Boiler Mountings

Model No : PV-101A
Product Name : Cast Iron Globe Valve
Product Standard : BS 5152 / Din 86251
Type of Pattern : Straight Pattern
Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Type of seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Stud, Nut & Washer : Carbon Steel as per IS 1367
Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
Gland Packing : Braided Graphited as per IS 4687
Pressure Rating : PN 16
Hydraulic Test Pressure : Body 26 Kg/cm2, Seat 17.3 Kg/cm²
Working Pressure : Max. BOP 13 Kg/cm²
Working Temperature : Max. 220 °C


Model No : PV-101B
Product Name : Cast Iron Globe Valve
Product Standard : BS 5152 / Din 86251
Type of Pattern : Straight Pattern
Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Type of seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Stud, Nut & Washer : Carbon Steel as per IS 1367
Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
Gland Packing : Braided Graphited as per IS 4687
Pressure Rating : PN 10
Hydraulic Test Pressure : Body 17 Kg/cm², Seat 11.3 Kg/cm²
Working Pressure : Max. BOP 8.5 Kg/cm²
Working Temperature : Max. 220 °C
End Details : Flanged ends as per DIN 2532 Raised Face.


Model No : PV-101C
Product Name : Cast Iron Stop & Non Return Valve
Product Standard : BS 5152 / Din 86251
Type of Pattern : Straight Pattern
Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Type of seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Stud, Nut & Washer : Carbon Steel as per IS 1367
Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
Gland Packing : Braided Graphited as per IS 4687
Pressure Rating : PN 16
Hydraulic Test Pressure : Body 26 Kg/cm², Seat 17.3 Kg/cm²
Working Pressure : Max. BOP 13 Kg/cm²
Working Temperature : Max. 220 °C
End Details : Flanged ends as per DIN 2533 Raised Face.


Model No : PV-101D
Product Name : Cast Iron Stop & Non Return Valve
Product Standard : BS 5152 / Din 86251
Type of Pattern : Straight Pattern
Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Type of seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Stud, Nut & Washer : Carbon Steel as per IS 1367
Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
Gland Packing : Braided Graphited as per IS 4687
Pressure Rating : PN 10
Hydraulic Test Pressure : Body 17 Kg/cm², Seat 11.3 Kg/cm²
Working Pressure : Max. BOP 8.5 Kg/cm²
Working Temperature : Max. 220 °C
End Details : Flanged ends as per DIN 2532 Raised Face.


Model No : PV-102A
Product Name : Cast Iron Angle Globe Valve
Product Standard : BS 5152 / Din 86251
Type of Pattern : Right Angle Pattern
Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Type of seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Stud, Nut & Washer : Carbon Steel as per IS 1367
Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
Gland Packing : Braided Graphited as per IS 4687
Pressure Rating : PN 16
Hydraulic Test Pressure : Body 26 Kg/cm², Seat 17.3 Kg/cm²
Working Pressure : Max. BOP 13 Kg/cm²
Working Temperature : Max. 220 °C
End Details : Flanged ends as per DIN 2533 Raised Face.


Model No : PV-102B
Product Name : Cast Iron Stop & Non Return Valve
Product Standard : BS 5152 / Din 86251
Type of Pattern : Right Angle Pattern
Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Type of seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Stud, Nut & Washer : Carbon Steel as per IS 1367
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Gland Packing : Braided Graphited as per IS 4687
Pressure Rating : PN 10
Hydraulic Test Pressure : Body 26 Kg/cm², Seat 17.3 Kg/cm²
Working Pressure : Max. BOP 13 Kg/cm²
Working Temperature : Max. 220 °C
End Details : Flanged ends as per DIN 2533 Raised Face.


Model No : PV-103A
Product Name : Cast Iron Horizontal Lift Check Valve
Product Standard : BS 5153
Type of Pattern : Straight Pattern
Product Description : Bolted Cover
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Type of seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Handwheel : Cast Iron as per IS 1367
Stud, Nut & Washer : Carbon Steel as per IS 1367
Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
Gland Packing : Braided Graphited as per IS 4687
Pressure Rating : PN 16
Hydraulic Test Pressure : Body 26 Kg/cm², Seat 17.3 Kg/cm²
Working Pressure : Max. BOP 13 Kg/cm²
Working Temperature : Max. 220 °C
End Details : Flanged ends as per DIN 2533 Raised Face.


Model No : PV-103B
Product Name : Cast Iron Horizontal Lift Check Valve
Product Standard : BS 5153
Type of Pattern : Straight Pattern
Product Description : Bolted Cover
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Type of seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Handwheel : Cast Iron as per IS 1367
Stud, Nut & Washer : Carbon Steel as per IS 1367
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Pressure Rating : PN 10
Hydraulic Test Pressure : Body 17 Kg/cm², Seat 11.3 Kg/cm²
Working Pressure : Max. BOP 8.5 Kg/cm²
Working Temperature : Max. 220 °C
End Details : Flanged ends as per DIN 2532 Raised Face.


Model No : PV-104
Product Name : Cast Iron Angle Lift Check Valve
Product Standard : BS 5153
Type of Pattern : Right Angle Pattern
Product Description : Bolted Cover
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Type of seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Stud, Nut & Washer : Carbon Steel as per IS 1367
Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
Gland Packing : Braided Graphited as per IS 4687
Pressure Rating : PN 16
Hydraulic Test Pressure : Body 26 Kg/cm², Seat 17.3 Kg/cm²
Working Pressure : Max. BOP 13 Kg/cm²
Working Temperature : Max. 220 °C
End Details : Flanged ends as per DIN 2532 Raised Face.


Model No : PV-105
Product Name : Cast Iron Accessible feed Check valve
Type of Pattern : Right Angle Pattern
Product Description : Straight & Curved Inlet without inspection Branch
Type of seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Stud, Nut & Washer : Carbon Steel as per IS 1367
Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
Gland Packing : Braided Graphited as per IS 4687
Pressure Rating : PN 10
Hydraulic Test Pressure : Body 21 Kg/cm², Seat 14 Kg/cm²
Working Pressure : Max. BOP 10.54 Kg/cm²
Working Temperature : Max. 220 °C
End Details : Flanged ends as per BS 10 Table F, Flat face.


Model No : PV-106
Product Name : Cast Iron Swing Check valve
Product Standard : BS 5153
Type of Pattern : Straight Pattern
Product Description : Bolted Cover
Type of seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Stud, Nut & Washer : Carbon Steel as per IS 1367
Locking Screw : Stainless Steel as per AISI 304
Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
Gland Packing : Braided Graphited as per IS 4687
Pressure Rating : Class 125
Hydraulic Test Pressure : Body 21 Kg/cm², Seat 14 Kg/cm²
Working Pressure : Max. BOP 10.54 Kg/cm²
Working Temperature : Max. 220 °C
End Details : Flanged ends as per BS 16.1 CL-125 Flat face.


Model No : PV-107
Product Name : Cast Iron "Y" Type Strainer
Type of Pattern : "Y" Type
Product Description : Screwed in Bonnet
Body & Cover : Cast Iron as per IBR86 to 93 Gr. A
Strainer : Stainless Steel as per AISI 410
Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
Pressure Rating : PN 10
Hydraulic Test Pressure : Body 26 Kg/cm²
Working Pressure : Max. BOP 13 Kg/cm²
Working Temperature : Max. 220 °C
End Details : Screwed Female Ends.


Model No : PV-108
Product Name : Cast Iron "Y" Type Strainer
Type of Pattern : "Y" Type
Product Description : Bolted Cover
Body & Cover : Cast Iron as per IBR 86 to 93 Gr. A
Strainer : Stainless Steel  as per AISI 304
Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
Drain Plug : Carbon Steel as per IS 1367
Pressure Rating : PN 10
Hydraulic Test Pressure : Body 17 Kg/cm²
Working Pressure : Max. BOP 10.55 Kg/cm²
Working Temperature : Max. 220 °C
End Details : Flanged ends


Model No : PV-109
Product Name : Cast Iron Vertical Intverted Stream Trap
Type of Pattern : Vertical Type
Product Description : Bolted Cover
Body & Cover : Cast Iron as per IBR 86 to 93 Gr. A
Bucket : Stainless Steel as per AISI 304
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Pressure Rating : Class 150
Hydraulic Test Pressure : Body 300Psi(g)
Working Pressure : Max. BOP 150Psi(g)
Working Temperature : Max. 220 °C
End Details : Flanged ends to BSP Parallel.


Model No : PV-110
Product Name : Cast Iron Moisture Seperator
Type of Pattern : Horizontal Type
Product Description : Provide Internal Ribs which removed the condensate from steam lines
Body : Cast Iron as per IBR 86 to 93 Gr. A
Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
Drain Plug : Carbon Steel as per IS 1367
Pressure Rating : Class 150
Hydraulic Test Pressure : Body 300 Psi(g)
Working Pressure : Max. BOP 150 Psi(g)
Working Temperature : Max. 220 °C
End Details : Flanged ends as per BS 10 Table F


Model No : PV-201
Product Name : Cast Steel Globe Valve
Product Standard :
BS 5160 / DIN 2401
Type of Pattern : Straight Pattern
Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
Body & Bonnet : Cast Steel as per ASTM A 216 Gr. WCB
Type of Seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Stud : Alloy Steel as per ASTM A 193 Gr. B7
Nut :
Alloy Steel as per ASTM A 194 Gr. 2H
Gasket :
Spiral Wound Gasket S.S. 304 Graphite Filled
Gland Packing : Braided Graphite as per IS 4687
Pressure Rating : PN 40
Hydraulic Test Pressure : Body 76 Kg/cm², Seat 38 Kg/cm²(Steam)

Working Temperature : Max. 425 °C
End Details : Flanged ends as per DIN 2545 Raised Face


Model No : PV-202
Product Name : Cast Steel Angle Globe Valve
Product Standard :
BS 5160 / DIN 2401
Type of Pattern : Right Angle Pattern
Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
Body & Bonnet : Cast Steel as per ASTM A 216 Gr. WCB
Type of Seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Stud : Alloy Steel as per ASTM A 193 Gr. B7
Nut :
Alloy Steel as per ASTM A 194 Gr. 2H
Gasket :
Spiral Wound Gasket S.S. 304 Graphite Filled
Gland Packing : Braided Graphite as per IS 4687
Pressure Rating : PN 40
Hydraulic Test Pressure : Body 76 Kg/cm², Seat 38 Kg/cm²(Steam)

Working Temperature : Max. 425 °C
End Details : Flanged ends as per DIN 2545 Raised Face


Model No : PV-203
Product Name : Cast Steel Horizontal Lift Check Valve
Product Standard :
BS 5160 / DIN 2401
Type of Pattern : Straight Pattern
Product Description : Bolted Cover
Body & Bonnet : Cast Steel as per ASTM A 216 Gr. WCB
Type of Seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Stud : Alloy Steel as per ASTM A 193 Gr. B7
Nut :
Alloy Steel as per ASTM A 194 Gr. 2H
Gasket :
Spiral Wound Gasket S.S. 304 Graphite Filled
Pressure Rating : PN 40
Hydraulic Test Pressure : Body 76 Kg/cm², Seat 38 Kg/cm²(Steam)

Working Temperature : Max. 425 °C
End Details : Flanged ends as per DIN 2545 Raised Face


Model No : PV-204
Product Name : Cast Steel Angle Lift Check Valve
Product Standard :
BS 5160 / DIN 2401
Type of Pattern : Right Angle Pattern
Product Description : Bolted Cover
Body & Bonnet : Cast Steel as per ASTM A 216 Gr. WCB
Type of Seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Stud : Alloy Steel as per ASTM A 193 Gr. B7
Nut :
Alloy Steel as per ASTM A 194 Gr. 2H
Gasket :
Spiral Wound Gasket S.S. 304 Graphite Filled
Gland Packing : Braided Graphite as per IS 4687
Pressure Rating : PN 40
Hydraulic Test Pressure : Body 76 Kg/cm², Seat 38 Kg/cm²(Steam)

Working Temperature : Max. 425 °C
End Details : Flanged ends as per DIN 2545 Raised Face


Model No : PV-205
Product Name : Cast Steel Parallel Slide Blow Off Valve
Product Description : Bolted Bonnet, Rack & Pinion Operated with key
Body & Bonnet : Cast Steel as per ASTM A 216 Gr. WCB
Type of Seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Stuffing Box : Bronze as per IS 318 LTB 2
Gland & Rack : Bronze as per IS 318 LTB 2
Stud & Nuts : Carbon Steel as per IS 1367
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Gland Packing : Braided Graphite as per IS 4687
Spring : Stainless Steel as per AISI 304
Box Key & Pinion :  Carbon Steel as per IS 1367
Hydraulic Test Pressure : Body 49.3 Kg/cm², Seat 24.6 Kg/cm²(Steam)

Working Temperature : Max. 400 °C
End Details : Flanged ends as per BS 10 Table "J" Flat Face


Model No : PV-206
Product Name : Cast Steel Sleeve Packed Water Level Valve
Product Description : With automatic Shut off Device in water arm
Upper & Lower arms
: Cast Steel as per ASTM A 216 Gr. WCB
Product Type : Right or Left hand Type
Drain Valve : Cast Steel as per IBR 73 to 80
Bonnet, Plug & Stem : Stainless Steel as per AISI 410
Ball : Stainless Steel as per AISI 304
Cone : Rubber as per IS 5192
Nut : Carbon Steel as per IS 1367
Lever : S.G. Iron as per ASTM A 536
Sleeve : Moulded Graphite
Hydraulic Test Pressure :
Body 49.3 Kg/cm², Seat 24.6 Kg/cm²(Steam)

Working Temperature : Max. 400 °C
End Details : Flanged ends as per BS 10 Table "J" Flat Face


Model No : PV-207
Product Name : Cast Carbon Steel "Y" Type Strainer
Product Description : Bolted Cover with S.S 304 Strainer
Body & Bonnet : Carbon Steel as per ASTM A 216 Gr. WCB
Strainer : Perforated S.S. Sheet as per AISI 304
Plug : Stainless Steel as per AISI 410
Hydraulic Test Pressure : Body 700 Psi(g)

Working Pressure : Max. BOP 350 Psi(g)
Working Temperature : Max. 400 °C
End Details : Flanged ends to BS10 Table "J" Flat Face


Model No : PV-208
Product Name : Cast Carbon Steel Accessible Feed Check Valve
Product Description : Bolted Bonnet with Straight inlet
Body & Bonnet : Cast Steel as per ASTM A 216 Gr. WCB
Type of Seat & Disc : Renewable
Trim : Stainless Steel (AISI 410)
Stud & Nuts : Carbon Steel as per IS 1367
Gland Packing :
Braided Graphite as per IS 2712 Gr W/3
Hydraulic Test Pressure : Body 700 Psi(g)
Working Pressure :
Max. BOP 350 Psi(g)
Working Temperature : Max. 400 °C
End Details : Flanged ends to BS 10 Table "J"


Model No : PV-209
Product Name : Cast Carbon Steel Moisture Seprator
Product Description : Internal rib type to remove the condensate from steam lines

Hydraulic Test Pressure : Body 700 Psi(g)
Working Pressure :
350 Psi(g)
Working Temperature : Max. 400 °C
End Details : Flanged ends to BS 10 Table "J"


Model No : PV-210
Product Name : Cast Carbon Steel Ball Valve
Product Description : Bolted, 3 piece Desing
Body & Connector : Cast Steel as per ASTM A 216 Gr. WCB
Type of Seat : Renewable
Trim : Sterm 13% Cr Steel AISI 410, Ball S.S AISI 304, Seat Ring Gland Packing PTFE Graphite impregnated
Hydraulic Test Pressure : 300 Pskg

Working Pressure : 150 Pskg
Working Temperature : 230 °C
End Details : Screwed Female ends BSP Taper


Model No : PV-211
Product Name : Cast Carbon Steel Ball Valve
Product Description : Bolted, 3 piece Desing
Body & Connector : Cast Steel as per ASTM A 216 Gr. WCB
Type of Seat : Renewable
Trim : Sterm 13% Cr Steel AISI 410, Ball S.S AISI 304, Seat Ring Gland Packing PTFE Graphite impregnated
Hydraulic Test Pressure : 300 Pskg

Working Pressure : 150 Pskg
Working Temperature : 230 °C
End Details : Flanges as per ASM B CI-150 R.F. Drilled


Model No : PV-301
Product Name : Cast Stainless Steel Thermodynamic Steam Trap
Product Description : Moving Disc with inbuilt integral Strainer
Body & Bonnet : Stainless Steel as per AISI 420
Disc :
Stainless Steel as per AISI 420
Plug : Stainless Steel as per AISI 420
Strainer : Perforated SS Steel as per AISI 304
Hydraulic Test Pressure :
63.3 Kg/Cm²
Working Pressure :
Max. BOP 31.6 Kg/Cm²
Working Temperature : Max. 400 °C
End Details : Screwed Female BSP Taper Threads


Model No : PV-413A
Product Name :  Bronze Fusible Plug
Product Description : One Piece Design
Body : Bronze as per IBR 282 (A) (IV) G. B
Fusible Alloy : Lead tin Alloy as per IBR 333
Hydraulic Test Pressure :
Body 500 Psi(g)
Working Pressure :
250 Psi (g)
Working Temperature :
Max. 228 °C
End Details : Male end to BSP Taper


Model No : PV-413B
Product Name :  Bronze Fusible Plug
Product Description : Two Piece Design
Body : Bronze as per IBR 282 (A) (IV) G. B
Fusible Alloy : Lead tin Alloy as per IBR 333
Hydraulic Test Pressure :
Body 500 Psi(g)
Working Pressure :
250 Psi (g)
Working Temperature :
Max. 228 °C
End Details : Male end to BSP Taper


Model No : PV-413C
Product Name :  Bronze Fusible Plug
Product Description : Loco Type
Body : Bronze as per IBR 282 (A) (IV) G. B
Fusible Alloy : Lead tin Alloy as per IBR 333
Hydraulic Test Pressure :
Body 500 Psi(g)
Working Pressure :
250 Psi (g)
Working Temperature :
Max. 228 °C
End Details : Male end to BSP Taper


Model No : PV-414
Product Name :  Bronze Sleeve Packed Water Level Gauge
Product Description : with automatic shut off in the water arm
Body : Bronze as per IBR 282 (A) (IV) Gr. B
Sleeve : Moulded Graphite
Stem : Stainless Steel as per AISI 410
Ball : Stainless Steel as per AISI 304
Fusible Alloy : Lead tin Alloy as per IBR 333
Hydraulic Test Pressure :
Body 500 Psi(g)
Working Pressure :
250 Psi (g)
Working Temperature :
Max. 228 °C
End Details : Male end to BSP Taper H


Contact Form

Message: