We are a prominent organization engaged in manufacturing and supplying a commendable gamut of qualitative Cast Iron Valves. The offered range encompasses Cast Iron Butterfly Valve, Cast Iron Y Type Strainer, Cast Iron Ball Valve, , Cast Iron Dual Plate Check Valve and Cast Iron Non Return Valve. Apart from this, we provide Cast Iron Sluice Valve, Cast Iron Swing Check Valve, Cast Iron Accessible Feed Check Valve, Cast Iron Horizontal Lift Check Valve, Cast Iron Globe Steam Stop Valve, Cast Iron Right Angle Globe Valve and Cast Iron Globe Valve, in this range. Fabricated using supreme quality raw material, these offered valves comply with the defined parameters of the industry. Furthermore, keeping in mind the multifarious demands of the clients, we are presenting this gamut in different specifications..

Model No : PV-101A

  • Product Name : Cast Iron Globe Valve
  • Product Standard : BS 5152 / Din 86251
  • Type of Pattern : Straight Pattern
  • Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
  • Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
  • Type of seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Handwheel : Cast Iron as per IS 210 Gr. FG 200
  • Stud, Nut & Washer : Carbon Steel as per IS 1367
  • Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
  • Gland Packing : Braided Graphited as per IS 4687
  • Pressure Rating : PN 16
  • Hydraulic Test Pressure : Body 26 Kg/cm2, Seat 17.3 Kg/cm²
  • Working Pressure : Max. BOP 13 Kg/cm²
  • Working Temperature : Max. 220 °C

Model No : PV-101B

  • Product Name : Cast Iron Globe Valve
  • Product Standard : BS 5152 / Din 86251
  • Type of Pattern : Straight Pattern
  • Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
  • Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
  • Type of seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Handwheel : Cast Iron as per IS 210 Gr. FG 200
  • Stud, Nut & Washer : Carbon Steel as per IS 1367
  • Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
  • Gland Packing : Braided Graphited as per IS 4687
  • Pressure Rating : PN 10
  • Hydraulic Test Pressure : Body 17 Kg/cm², Seat 11.3 Kg/cm²
  • Working Pressure : Max. BOP 8.5 Kg/cm²
  • Working Temperature : Max. 220 °C
  • End Details : Flanged ends as per DIN 2532 Raised Face.

Model No : PV-101C

  • Product Name : Cast Iron Stop & Non Return Valve
  • Product Standard : BS 5152 / Din 86251
  • Type of Pattern : Straight Pattern
  • Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
  • Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
  • Type of seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Handwheel : Cast Iron as per IS 210 Gr. FG 200
  • Stud, Nut & Washer : Carbon Steel as per IS 1367
  • Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
  • Gland Packing : Braided Graphited as per IS 4687
  • Pressure Rating : PN 16
  • Hydraulic Test Pressure : Body 26 Kg/cm², Seat 17.3 Kg/cm²
  • Working Pressure : Max. BOP 13 Kg/cm²
  • Working Temperature : Max. 220 °C
  • End Details : Flanged ends as per DIN 2533 Raised Face.

Model No : PV-101D

  • Product Name : Cast Iron Stop & Non Return Valve
  • Product Standard : BS 5152 / Din 86251
  • Type of Pattern : Straight Pattern
  • Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
  • Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
  • Type of seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Handwheel : Cast Iron as per IS 210 Gr. FG 200
  • Stud, Nut & Washer : Carbon Steel as per IS 1367
  • Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
  • Gland Packing : Braided Graphited as per IS 4687
  • Pressure Rating : PN 10
  • Hydraulic Test Pressure : Body 17 Kg/cm², Seat 11.3 Kg/cm²
  • Working Pressure : Max. BOP 8.5 Kg/cm²
  • Working Temperature : Max. 220 °C
  • End Details : Flanged ends as per DIN 2532 Raised Face.

Model No : PV-102A

  • Product Name : Cast Iron Angle Globe Valve
  • Product Standard : BS 5152 / Din 86251
  • Type of Pattern : Right Angle Pattern
  • Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
  • Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
  • Type of seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Handwheel : Cast Iron as per IS 210 Gr. FG 200
  • Stud, Nut & Washer : Carbon Steel as per IS 1367
  • Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
  • Gland Packing : Braided Graphited as per IS 4687
  • Pressure Rating : PN 16
  • Hydraulic Test Pressure : Body 26 Kg/cm², Seat 17.3 Kg/cm²
  • Working Pressure : Max. BOP 13 Kg/cm²
  • Working Temperature : Max. 220 °C
  • End Details : Flanged ends as per DIN 2533 Raised Face.

Model No : PV-102B

  • Product Name : Cast Iron Stop & Non Return Valve
  • Product Standard : BS 5152 / Din 86251
  • Type of Pattern : Right Angle Pattern
  • Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
  • Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
  • Type of seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Handwheel : Cast Iron as per IS 210 Gr. FG 200
  • Stud, Nut & Washer : Carbon Steel as per IS 1367
  • Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
  • Gland Packing : Braided Graphited as per IS 4687
  • Pressure Rating : PN 10
  • Hydraulic Test Pressure : Body 26 Kg/cm², Seat 17.3 Kg/cm²
  • Working Pressure : Max. BOP 13 Kg/cm²
  • Working Temperature : Max. 220 °C
  • End Details : Flanged ends as per DIN 2533 Raised Face.

Model No : PV-103A

  • Product Name : Cast Iron Horizontal Lift Check Valve
  • Product Standard : BS 5153
  • Type of Pattern : Straight Pattern
  • Product Description : Bolted Cover
  • Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
  • Type of seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Handwheel : Cast Iron as per IS 1367
  • Stud, Nut & Washer : Carbon Steel as per IS 1367
  • Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
  • Gland Packing : Braided Graphited as per IS 4687
  • Pressure Rating : PN 16
  • Hydraulic Test Pressure : Body 26 Kg/cm², Seat 17.3 Kg/cm²
  • Working Pressure : Max. BOP 13 Kg/cm²
  • Working Temperature : Max. 220 °C
  • End Details : Flanged ends as per DIN 2533 Raised Face.

Model No : PV-103B

  • Product Name : Cast Iron Horizontal Lift Check Valve
  • Product Standard : BS 5153
  • Type of Pattern : Straight Pattern
  • Product Description : Bolted Cover
  • Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
  • Type of seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Handwheel : Cast Iron as per IS 1367
  • Stud, Nut & Washer : Carbon Steel as per IS 1367
  • Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
  • Pressure Rating : PN 10
  • Hydraulic Test Pressure : Body 17 Kg/cm², Seat 11.3 Kg/cm²
  • Working Pressure : Max. BOP 8.5 Kg/cm²
  • Working Temperature : Max. 220 °C
  • End Details : Flanged ends as per DIN 2532 Raised Face.

Model No : PV-104

  • Product Name : Cast Iron Angle Lift Check Valve
  • Product Standard : BS 5153
  • Type of Pattern : Right Angle Pattern
  • Product Description : Bolted Cover
  • Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
  • Type of seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Stud, Nut & Washer : Carbon Steel as per IS 1367
  • Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
  • Gland Packing : Braided Graphited as per IS 4687
  • Pressure Rating : PN 16
  • Hydraulic Test Pressure : Body 26 Kg/cm², Seat 17.3 Kg/cm²
  • Working Pressure : Max. BOP 13 Kg/cm²
  • Working Temperature : Max. 220 °C
  • End Details : Flanged ends as per DIN 2532 Raised Face.

Model No : PV-105

  • Product Name : Cast Iron Accessible feed Check valve
  • Type of Pattern : Right Angle Pattern
  • Product Description : Straight & Curved Inlet without inspection Branch
  • Type of seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Stud, Nut & Washer : Carbon Steel as per IS 1367
  • Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
  • Gland Packing : Braided Graphited as per IS 4687
  • Pressure Rating : PN 10
  • Hydraulic Test Pressure : Body 21 Kg/cm², Seat 14 Kg/cm²
  • Working Pressure : Max. BOP 10.54 Kg/cm²
  • Working Temperature : Max. 220 °C
  • End Details : Flanged ends as per BS 10 Table F, Flat face.

Model No : PV-106

  • Product Name : Cast Iron Swing Check valve
  • Product Standard : BS 5153
  • Type of Pattern : Straight Pattern
  • Product Description : Bolted Cover
  • Type of seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Stud, Nut & Washer : Carbon Steel as per IS 1367
  • Locking Screw : Stainless Steel as per AISI 304
  • Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
  • Gland Packing : Braided Graphited as per IS 4687
  • Pressure Rating : Class 125
  • Hydraulic Test Pressure : Body 21 Kg/cm², Seat 14 Kg/cm²
  • Working Pressure : Max. BOP 10.54 Kg/cm²
  • Working Temperature : Max. 220 °C
  • End Details : Flanged ends as per BS 16.1 CL-125 Flat face.

Model No : PV-107

  • Product Name : Cast Iron "Y" Type Strainer
  • Type of Pattern : "Y" Type
  • Product Description : Screwed in Bonnet
  • Body & Cover : Cast Iron as per IBR86 to 93 Gr. A
  • Strainer : Stainless Steel as per AISI 410
  • Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
  • Pressure Rating : PN 10
  • Hydraulic Test Pressure : Body 26 Kg/cm²
  • Working Pressure : Max. BOP 13 Kg/cm²
  • Working Temperature : Max. 220 °C
  • End Details : Screwed Female Ends.

Model No : PV-108

  • Product Name : Cast Iron "Y" Type Strainer
  • Type of Pattern : "Y" Type
  • Product Description : Bolted Cover
  • Body & Cover : Cast Iron as per IBR 86 to 93 Gr. A
  • Strainer : Stainless Steel as per AISI 304
  • Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
  • Drain Plug : Carbon Steel as per IS 1367
  • Pressure Rating : PN 10
  • Hydraulic Test Pressure : Body 17 Kg/cm²
  • Working Pressure : Max. BOP 10.55 Kg/cm²
  • Working Temperature : Max. 220 °C
  • End Details : Flanged ends

Model No : PV-109

  • Product Name : Cast Iron Vertical Intverted Stream Trap
  • Type of Pattern : Vertical Type
  • Product Description : Bolted Cover
  • Body & Cover : Cast Iron as per IBR 86 to 93 Gr. A
  • Bucket : Stainless Steel as per AISI 304
  • Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
  • Pressure Rating : Class 150
  • Hydraulic Test Pressure : Body 300Psi(g)
  • Working Pressure : Max. BOP 150Psi(g)
  • Working Temperature : Max. 220 °C
  • End Details : Flanged ends to BSP Parallel.

Model No : PV-110

  • Product Name : Cast Iron Moisture Seperator
  • Type of Pattern : Horizontal Type
  • Product Description : Provide Internal Ribs which removed the condensate from steam lines
  • Body : Cast Iron as per IBR 86 to 93 Gr. A
  • Gasket : Steam Joining Sheet as per IS 2712 Gr. W/3
  • Drain Plug : Carbon Steel as per IS 1367
  • Pressure Rating : Class 150
  • Hydraulic Test Pressure : Body 300 Psi(g)
  • Working Pressure : Max. BOP 150 Psi(g)
  • Working Temperature : Max. 220 °C
  • End Details : Flanged ends as per BS 10 Table F

Model No : PV-201

  • Product Name : Cast Steel Globe Valve
  • Product Standard : BS 5160 / DIN 2401
  • Type of Pattern : Straight Pattern
  • Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
  • Body & Bonnet : Cast Steel as per ASTM A 216 Gr. WCB
  • Type of Seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Handwheel : Cast Iron as per IS 210 Gr. FG 200
  • Stud : Alloy Steel as per ASTM A 193 Gr. B7
  • Nut : Alloy Steel as per ASTM A 194 Gr. 2H
  • Gasket : Spiral Wound Gasket S.S. 304 Graphite Filled
  • Gland Packing : Braided Graphite as per IS 4687
  • Pressure Rating : PN 40
  • Hydraulic Test Pressure : Body 76 Kg/cm², Seat 38 Kg/cm²(Steam)
  • Working Temperature : Max. 425 °C
  • End Details : Flanged ends as per DIN 2545 Raised Face

Model No : PV-202

  • Product Name : Cast Steel Angle Globe Valve
  • Product Standard : BS 5160 / DIN 2401
  • Type of Pattern : Right Angle Pattern
  • Product Description : Bolted Bonnet, Outside Screw & Yoke type Rising Stem
  • Body & Bonnet : Cast Steel as per ASTM A 216 Gr. WCB
  • Type of Seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Handwheel : Cast Iron as per IS 210 Gr. FG 200
  • Stud : Alloy Steel as per ASTM A 193 Gr. B7
  • Nut : Alloy Steel as per ASTM A 194 Gr. 2H
  • Gasket : Spiral Wound Gasket S.S. 304 Graphite Filled
  • Gland Packing : Braided Graphite as per IS 4687
  • Pressure Rating : PN 40
  • Hydraulic Test Pressure : Body 76 Kg/cm², Seat 38 Kg/cm²(Steam)
  • Working Temperature : Max. 425 °C
  • End Details : Flanged ends as per DIN 2545 Raised Face

Model No : PV-203

  • Product Name : Cast Steel Horizontal Lift Check Valve
  • Product Standard : BS 5160 / DIN 2401
  • Type of Pattern : Straight Pattern
  • Product Description : Bolted Cover
  • Body & Bonnet : Cast Steel as per ASTM A 216 Gr. WCB
  • Type of Seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Stud : Alloy Steel as per ASTM A 193 Gr. B7
  • Nut : Alloy Steel as per ASTM A 194 Gr. 2H
  • Gasket : Spiral Wound Gasket S.S. 304 Graphite Filled
  • Pressure Rating : PN 40
  • Hydraulic Test Pressure : Body 76 Kg/cm², Seat 38 Kg/cm²(Steam)
  • Working Temperature : Max. 425 °C
  • End Details : Flanged ends as per DIN 2545 Raised Face

Model No : PV-204

  • Product Name : Cast Steel Angle Lift Check Valve
  • Product Standard : BS 5160 / DIN 2401
  • Type of Pattern : Right Angle Pattern
  • Product Description : Bolted Cover
  • Body & Bonnet : Cast Steel as per ASTM A 216 Gr. WCB
  • Type of Seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Stud : Alloy Steel as per ASTM A 193 Gr. B7
  • Nut : Alloy Steel as per ASTM A 194 Gr. 2H
  • Gasket : Spiral Wound Gasket S.S. 304 Graphite Filled
  • Gland Packing : Braided Graphite as per IS 4687
  • Pressure Rating : PN 40
  • Hydraulic Test Pressure : Body 76 Kg/cm², Seat 38 Kg/cm²(Steam)
  • Working Temperature : Max. 425 °C
  • End Details : Flanged ends as per DIN 2545 Raised Face

Model No : PV-205

  • Product Name : Cast Steel Parallel Slide Blow Off Valve
  • Product Description : Bolted Bonnet, Rack & Pinion Operated with key
  • Body & Bonnet : Cast Steel as per ASTM A 216 Gr. WCB
  • Type of Seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Stuffing Box : Bronze as per IS 318 LTB 2
  • Gland & Rack : Bronze as per IS 318 LTB 2
  • Stud & Nuts : Carbon Steel as per IS 1367
  • Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
  • Gland Packing : Braided Graphite as per IS 4687
  • Spring : Stainless Steel as per AISI 304
  • Box Key & Pinion : Carbon Steel as per IS 1367
  • Hydraulic Test Pressure : Body 49.3 Kg/cm², Seat 24.6 Kg/cm²(Steam)
  • Working Temperature : Max. 400 °C
  • End Details : Flanged ends as per BS 10 Table "J" Flat Face

Model No : PV-206

  • Product Name : Cast Steel Sleeve Packed Water Level Valve
  • Product Description : With automatic Shut off Device in water arm
  • Upper & Lower arms : Cast Steel as per ASTM A 216 Gr. WCB
  • Product Type : Right or Left hand Type
  • Drain Valve : Cast Steel as per IBR 73 to 80
  • Bonnet, Plug & Stem : Stainless Steel as per AISI 410
  • Ball : Stainless Steel as per AISI 304
  • Cone : Rubber as per IS 5192
  • Nut : Carbon Steel as per IS 1367
  • Lever : S.G. Iron as per ASTM A 536
  • Sleeve : Moulded Graphite
  • Hydraulic Test Pressure : Body 49.3 Kg/cm², Seat 24.6 Kg/cm²(Steam)
  • Working Temperature : Max. 400 °C
  • End Details : Flanged ends as per BS 10 Table "J" Flat Face

Model No : PV-207R

  • Product Name : Cast Carbon Steel "Y" Type Strainer
  • Product Description : Bolted Cover with S.S 304 Strainer
  • Body & Bonnet : Carbon Steel as per ASTM A 216 Gr. WCB
  • Strainer : Perforated S.S. Sheet as per AISI 304
  • Plug : Stainless Steel as per AISI 410
  • Hydraulic Test Pressure : Body 700 Psi(g)
  • Working Pressure : Max. BOP 350 Psi(g)
  • Working Temperature : Max. 400 °C
  • End Details : Flanged ends to BS10 Table "J" Flat Face

Model No : PV-208

  • Product Name : Cast Carbon Steel Accessible Feed Check Valve
  • Product Description : Bolted Bonnet with Straight inlet
  • Body & Bonnet : Cast Steel as per ASTM A 216 Gr. WCB
  • Type of Seat & Disc : Renewable
  • Trim : Stainless Steel (AISI 410)
  • Stud & Nuts : Carbon Steel as per IS 1367
  • Gland Packing : Braided Graphite as per IS 2712 Gr W/3
  • Hydraulic Test Pressure : Body 700 Psi(g)
  • Working Pressure : Max. BOP 350 Psi(g)
  • Working Temperature : Max. 400 °C
  • End Details : Flanged ends to BS 10 Table "J"

Model No : PV-209

  • Product Name : Cast Carbon Steel Moisture Seprator
  • Product Description : Internal rib type to remove the condensate from steam lines
  • Hydraulic Test Pressure : Body 700 Psi(g)
  • Working Pressure : 350 Psi(g)
  • Working Temperature : Max. 400 °C
  • End Details : Flanged ends to BS 10 Table "J"

Model No : PV-210

  • Product Name : Cast Carbon Steel Ball Valve
  • Product Description : Bolted, 3 piece Desing
  • Body & Connector : Cast Steel as per ASTM A 216 Gr. WCB
  • Type of Seat : Renewable
  • Trim : Sterm 13% Cr Steel AISI 410, Ball S.S AISI 304, Seat Ring Gland Packing PTFE Graphite impregnated
  • Hydraulic Test Pressure : 300 Pskg
  • Working Pressure : 150 Pskg
  • Working Temperature : 230 °C
  • End Details : Screwed Female ends BSP Taper

Model No : PV-211

  • Product Name : Cast Carbon Steel Ball Valve
  • Product Description : Bolted, 3 piece Desing
  • Body & Connector : Cast Steel as per ASTM A 216 Gr. WCB
  • Type of Seat : Renewable
  • Trim : Sterm 13% Cr Steel AISI 410, Ball S.S AISI 304, Seat Ring Gland Packing PTFE Graphite impregnated
  • Hydraulic Test Pressure : 300 Pskg
  • Working Pressure : 150 Pskg
  • Working Temperature : 230 °C
  • End Details : Flanges as per ASM B CI-150 R.F. Drilled

Model No : PV-301

  • Product Name : Cast Stainless Steel Thermodynamic Steam Trap
  • Product Description : Moving Disc with inbuilt integral Strainer
  • Body & Bonnet : Stainless Steel as per AISI 420
  • Disc : Stainless Steel as per AISI 420
  • Plug : Stainless Steel as per AISI 420
  • Strainer : Perforated SS Steel as per AISI 304
  • Hydraulic Test Pressure : 63.3 Kg/Cm²
  • Working Pressure : Max. BOP 31.6 Kg/Cm²
  • Working Temperature : Max. 400 °C
  • End Details : Screwed Female BSP Taper Threads

Model No : PV-413A

  • Product Name : Bronze Fusible Plug
  • Product Description : One Piece Design
  • Body : Bronze as per IBR 282 (A) (IV) G. B
  • Fusible Alloy : Lead tin Alloy as per IBR 333
  • Hydraulic Test Pressure : Body 500 Psi(g)
  • Working Pressure : 250 Psi (g)
  • Working Temperature : Max. 228 °C
  • End Details : Male end to BSP Taper

Model No : PV-413B

  • Product Name : Bronze Fusible Plug
  • Product Description : Two Piece Design
  • Body : Bronze as per IBR 282 (A) (IV) G. B
  • Fusible Alloy : Lead tin Alloy as per IBR 333
  • Hydraulic Test Pressure : Body 500 Psi(g)
  • Working Pressure : 250 Psi (g)
  • Working Temperature : Max. 228 °C
  • End Details : Male end to BSP Taper

Model No : PV-413C

  • Product Name : Bronze Fusible Plug
  • Product Description : Loco Type
  • Body : Bronze as per IBR 282 (A) (IV) G. B
  • Fusible Alloy : Lead tin Alloy as per IBR 333
  • Hydraulic Test Pressure : Body 500 Psi(g)
  • Working Pressure : 250 Psi (g)
  • Working Temperature : Max. 228 °C
  • End Details : Male end to BSP Taper

Model No : PV-414

  • Product Name : Bronze Sleeve Packed Water Level Gauge
  • Product Description : with automatic shut off in the water arm
  • Body : Bronze as per IBR 282 (A) (IV) Gr. B
  • Sleeve : Moulded Graphite
  • Stem : Stainless Steel as per AISI 410
  • Ball : Stainless Steel as per AISI 304
  • Fusible Alloy : Lead tin Alloy as per IBR 333
  • Hydraulic Test Pressure : Body 500 Psi(g)
  • Working Pressure : 250 Psi (g)
  • Working Temperature : Max. 228 °C
  • End Details : Male end to BSP Taper H

Social Media

Contact Info

  • Aman Engineering Works, C-54/55, Focal Point Extn, Jalandhar, Punjab, India-144004
  • +91-181-2603614-16,
    +91-181-2292364-66
  • info@kranti-group.com